Why is my FLEX not alarming?

There are several things to check on the FLEX to ensure you are set up to ALARM.

  • First be sure the room is not in STANDBY mode. You can go to the PROFILE list and check the status there.
  • Under the ROOM tab make sure that the parameter you want to alarm is ENABLED.
  • Next go to the ALARM setup and make sure the lo and/or hi alarms are ENABLED.
  • In ROOM PROFILE screen, make sure the ALARM ENABLE is ENABLED.
  • In the ALARM SETTINGS screen make sure the AUDIBLE ALARM is ENABLED.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.